You can search for “Beginning From Transformers” in 100 degrees to find the latest chapter!

Inside the container, three different sizes of equipment were revealed.

After Xiaowu completed the task, he saw him stretch out his hand, jumped off the ground, and leaped into Sun Cheng’s palm.

With a slight smile, Sun Cheng put it back in his pocket, and his eyes looked towards the three devices that appeared in the container in front of him.

The 3 devices in the container were also brought back from otherworld. Among them, the 2 devices on the left are the same size. It seems that they are not nearly 3 meters high and 6 7 meters long. They are the two converted by Decepticon Engineers. Twinscan extreme ultraviolet lithography (EUVL) production platform.

This is a 22-nanometer lithography equipment manufactured by ASML Holding, the Netherlands semiconductor equipment manufacturer. It is also the most advanced lithography machine that Sun Cheng can buy in other worlds.

After the transformation of Decepticon Engineers, it can now provide 14-nanometer precision line width and spacing, and the nano-level direct writing efficiency of the semiconductor is much higher than that of the original device by nearly 170%. device.

However, if they were compared with the third device on the right, which was almost a lap larger than the sum of them, the Twinscan platform modified by these two engineers would not be able to get on the table.

“Ring three-dimensional manufacturing machine!”

Suddenly spit out these in his mouth, Sun Cheng walked slowly to the device, reached for the device in front of him, bright light glittering in his eyes.

The name of this device is ‘ring three-dimensional manufacturing machine’, but compared to this name, he prefers to call it ‘3D Printer’.

Because the device in front of Sun Cheng was designed by Decepticon Engineers at his request, and it was made for Sun Cheng to mass-produce some high-tech products in reality.

Although this 3D Printer is far inferior in performance to those used for manufacturing robots in his Base 2, it is definitely not the so-called 3D printing devices designed by Human on Earth. .

How to say, the gap between the two is just like the concept of straw paper and the finished product, the technical generation difference in it will never be lower than the 2 2 generation.

“This is a real treasure …”

Touching the finger of the 3D Printer in front of him, he shivered gently involuntarily, and Sun Cheng’s face was full of excitement.

These three machines were specially brought over from otherworld for his layout in reality.

Next to that, the two Twinscan platforms that have been upgraded to the 2-nanometer level, even in the real world, are not the most advanced lithography machines available in any country. For his production strategy starting with semiconductor memory, the benefits are huge of.

According to Sun Cheng’s understanding, ASML Holding is not only in [Transformers World], but also banned the sale of China.

In this world where he is, this Netherlands company has also been controlled by the well-known semiconductor giants of Europe and America such as Intel, Western Digital, Micron Technology, etc. more than ten years ago.

In recent years, the highest-standard 14-nanometer lithography machine produced by ASML Holding is also not sold to other semiconductor companies except Intel, Western Digital, and Micron Technology, and the difference between Europe and America and Asia companies is obvious.

Dozens of semiconductor companies in China can only buy lithography equipment at the 22-nanometer level from ASML Holding, and the price is 30% more expensive than Europe and America companies. Thinking about it, people are also playing the technical blockade.

And another 3D Printer, its role is even greater.

It only needs to input the product design, data and information to be produced in its central processor, while providing sufficient raw materials. With 100 mechanical arms inside, it can automatically manufacture everything from firearms to electronic equipment and even high-precision products. The number of products is 1000, and its manufacturing efficiency is very high.

According to Sun Cheng ’s tests in otherworld, under full operation, it can produce 1784 36T hard drives at the same time in 1 seconds, almost every 4 seventeen-eighteen seconds to make a hard drive. This efficiency is to take Compared with Seagate’s investment of 7 100000000 million USD, the fastest and most efficient semi-automatic hard drive production line in Ohio, USA, it is only strong.

If it is replaced with a simpler product such as a firearm, the efficiency of this 3D Printer can be even higher.

Safeguard moved forward and came to this 3D Printer, looking at it intently.

It seemed to have some interest in this device, but it quickly withdrew its gaze and quietly guarded beside Sun Cheng.

Sun Cheng didn’t care about it, just stood quietly in front of the 3D Printer and touched the outer wall of its cold equipment.

It took a while to take back my eyes.

Using this divine artifact in manufacturing semiconductor memory is too wasteful. Semiconductor memory such as hard drives can be produced with some machines and equipment produced by this world.

For this 3D Printer, it is what it should do to manufacture more sophisticated equipment such as robots.

However, before the production line problem is resolved in reality, letting it temporarily produce a hard drive for [Cybertron Technologies Inc.] can at least save him a lot of time.

“… It’s time for the Human of this world to learn about Planet Cybertron’s manufacturing technology!”

The palm reluctant to leave rubbed on the device for a while, Sun Cheng slowly retracted his finger, and secretly made this decision in his heart.

And he, [Cybertron Technologies Inc.] founded in the real world, is also time to move!

……

In a few days, it was fleeting.

After Boss Sun Cheng personally gave instructions, Wang Lu also seemed to be on the clockwork. With sufficient funds, they recruited 20-30 more technical backbones who had worked in the industry for many years. After that, Cybertron Technologies Inc., a company with no reputation in the industry, finally started to take action!

“Ready to upload our products!”

Based on several different versions of cloud disk client based on mobile apps such as computer and cellphone, after the Ministry of Computer Industry’s registration is completed, it will have been detected for more than a month non-stop, and it will be continuously modified to detect vulnerability. Clients with big problems are uploaded to many internet platforms and mobile malls.

No one knows that after waiting for approval, a product that is about to cause a huge sensation in this world will meet the world.

Ps:

Yesterday’s 2 was even more glamorous. Today the whole family is here and I am very happy.

After drinking a lot of wine, my head is still dizzy, but from the liver at 6:2 to the present, Chapter 1 is finally finished, and I will send it together!

Go to bed and wish everyone a happy Mid-Autumn Festival.


Tap the screen to use advanced tools Tip: You can use left and right keyboard keys to browse between chapters.

You'll Also Like